Lego Fidget Spinner
We are going to show you how to make a regular sized Lego Fidget Spinner and a mini one too!
Regular Sized Lego Fidget Spinner Instructions
The picture above shows the Legos used to build the regular sized Lego fidget spinner. You can use either the 4x2 or 3x2 sized blocks. Here we are using four 3x2 and four 4x2. The green circular piece if from a Ninjago spinner set. It isn't necessary, but makes it look really cool when it spins!
Add the four 3x2 pieces to the back of the large circle piece. Space them evenly around the circle.
Add the 4x4 blocks on top of the 3x2 blocks. If you can't find 2x2 blocks you can use 2x1 blocks or studs instead.
Place one of the small circles onto the crossaxle as shown in the picture above. Then place it through the large circle.
Add the four 4x2's (or 4x3's) on top of the large circle.
If you have a Ninjago spinner item to add to your fidget spinner, put it on next. Finally add the remaining circle piece to the other end of the crossaxle. Have fun spinning!
Mini Lego Fidget Spinner Instructions
The picture above shows the pieces needed for the mini Lego Fidget Spinner. If you don't have four 2x1 blocks, you can use studs instead.
Steps One, Two, and Three
First add four of the 2x2 blocks to the back of the large circle. Flip it over and add either 2x1's or studs on top of the 2x2 blocks. Then add the remaining 2x2 blocks on top as shown above.
Steps Four and Five
Place one of the small circle pieces on the crossaxle as shown above. Next place the crossaxle through the large circle. Finally add the other small circle to the end of the crossaxle. Now you are all ready to spin!